Rice Lake Portable, Side Railed and Flattop Truck Scales in the Central Carolina Scale Electronic Catalog

Rice Lake Weighing SURVIVOR® SR Low-Profile Siderail Truck Scale

The SURVIVOR SR truck scales feature a low-profile 8-inch thick steel and concrete weighbridge, and an up to 14-foot wide loading area for greater safety and faster processing during peak usage times.

The 24-inch main I-beams limit deflection under heavy loads. Cross members approximately every 4 feet spread the loads more evenly for less flexing and a longer life cycle

The SURVIVOR SR truck scales maintain accuracy even with a 90,000 lb load (on a 4-foot loading area) in mid span. The weighbridge deflection is less than 1:900. Less deflection means less cumulative metal fatigue and much longer life cycles.

Above: SURVIVOR SR Concrete and Steel Deck Model Illustration
Illustrated with optional Guiderails (mandatory requirement in many applications).

Backed by a ten-year limited weighbridge warranty and a two-year load cell warranty, the SURVIVOR SR delivers accuracy and dependability in extreme-duty, high-traffic vehicle weighing applications.

Concrete Deck

The entire 8” thick concrete deck weighbridge, of the SR, is supported by an intricate steel support structure consisting of a minimum of 8” wide flange, 35 lb beams and galvanized corrugated forming pans.

Each load cell has an individual capacity of 75,000 pounds, compared to only 50,000 pounds on many competitive models. Higher capacity load cells handle heavier loads with far fewer failures. Wire-braided copper transient bypass cables are provided at each load cell mount for individual load cell protection from direct lightning strikes to the scale or weighbridge.

 

Standard Features: Width: Three standard widths: 11 ft, 12 ft and 14 ft Length: Lengths from 10 ft Capacity: Up to 270,000 lb full scale capacity Approvals: NTEP certified, CC #98-011A1 CLC: 90,000 lb Concentrated Load Capacity DTA: 90,000 lb Dual Tandem Axle (DTA) "r" factor: 2.65 Deflection Factor: Very low deflection (1:900) under maximum load Load Cells/Mounts: 75,000-lb capacity load cells and pre-assembled mounts Junction Box(es): Appropriate for number of load cells utilized Deck: 8-inch thick reinforced concrete deck Protective Coatings: Undercarriage rust-proofed with sprayed asphalt emulsion; epoxy primer; alkyd enamel top coat Warranties: Ten-year limited warranty on the weighbridge         Options:   Lightning protection package Special loading configurations available Steel deck Grain dump modules Rebar and deck sheeting   Accessories: IQ plus® series digital indicators Ticket and document printers 4" or 6" remote flip-digit displays TransAct®/TransAct Plus® data management software Unattended truck scale system (ATS-1 and ATS-2) Traffic signals

 

For more information or a quote, call (919) 776-7737 or email centralcarolinascale@alltel.net